The utilization of sugarcane bagasse, cassava peels and corn husks in handmade paper production

Aminah Asngad, Santhyami Santhyami, Ardiyana Rahma Pertiwi, Carissa Rahmitasari

Abstract


High demands for trees as the raw material of paper can disrupt the stability of the environment. It is necessary to find alternatives from other materials which are more environmentally friendly. This study aims to determine the quality of paper made from combining sugarcane bagasse with cassava peels or with corn husks using PVAc or tapioca starch adhesives. A completely randomized 2 x 2 factorial design with five times replication was used. The parameters tested were the tensile and tear resistance of the paper using a micrometer and a universal testing machine. A sensory analysis from panelists was also conducted. The combination of J1P1 produced a paper with the highest tensile strength (11.30 MPa) and the highest tear strength (1.82 MPa). The combination of J2P2 produced a paper with the lowest tensile strength (10.35 MPa) and the lowest tear strength (1.62 MPa). Variance analysis showed that the type of adhesive used showed a significant result on both tensile and tear resistance but material choices and interaction between materials and adhesive choices was not significantly different from the result on both tensile and tear resistance. Sensory testing shows that the combination of J1P1 was preferred the most. It can be concluded that the combination of J1P1 appeared to be the best combination.

Keywords: Handmade paper, sugarcane bagasse, cassava peels, corn husk, PVAc tapioca starch, adhesive



Full Text:

PDF

References


Agustina, T.K., Wulandari, A., & Romy. (2009). Pengaruh temperatur, lama pemasakan, dan konsentrasi etanol pada pembuatan pulp berbahan baku jerami padi dengan larutan pemasak naoh-etanol. Jurnal Teknik Kimia, 16(3), 11–20. Retrieved from http://jtk.unsri.ac.id/index.php/jtk/article/view/81

Aripin, A.M., Kassim, A.S.M., Daud, Z., & Hatta, M.Z.M. (2013). Cassava peels for alternative fibre in pulp and paper industry: chemical properties and morphology characterization. International Journal of Integrated Engineering, 5(1), 30-33. Retrieved from https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/789

Artiyani, A. (2011). Bioetanol dari limbah kulit singkong melalui proses hidrolisis dan fermentasi dengan saccharomyes cereviase. Master Thesis of Environmental Engineering. Institut Teknologi Sepuluh November Surabaya.

Asngad, A., Inna, N,S., & Siska, S. (2016). Pemanfaatan kulit kacang dan bulu ayam sebagai bahan alternatif pembuatan kertas melalui chemical pulping dengan menggunakan NaOH dan CaO. Bioeksperimen: Jurnal Penelitian Biologi, 2(1), 25-34. Retrieved from http://journals.ums.ac.id/index.php/bioeksperimen/article/view/1578

Asngad, A., Trisnawati, S.N.I., & Sanastri, E.R. (2014). Pemanfaatan rumput gajah (pennisetum purpureum) untuk pembuatan kertas melalui chemical pulping menggunakan NaOH dan Na2CO3. Prosiding SNPS (Seminar Nasional Pendidikan Sains), 1. Retrieved from http://www.jurnal.fkip.uns.ac.id/index.php/snps/article/view/5099

Bahri, S. (2015). Pembuatan pulp dari batang pisang. Jurnal Teknologi Kimia Unimal, 4(2), 36-50. Retrieved from https://ojs.unimal.ac.id/jtk/article/view/72/58

Campione, G., Orlando, F., Fileccia, G. & Pauletta, M. (2019). Bond characterization of monolithic and layered glass panels and ultrasonic tests to control glued surfaces. Engineering Structures, 198, 45-55. Retrieved from https://doi.org/10.1016/j.engstruct.2019.109545

Eltahan, E. (2018). Structural parameters affecting tear strength of the fabrics tents. Alexandria Engineering Journal, 57(1), 97-105. Retrieved from https://doi.org/10.1016/J.AEJ.2016.12.005

Fagbemigun, T.K., Fagbemi, O.D., Otitoju, O., Mgbachiuzor, E., & Igwe, C.C. (2014). Pulp and paper-making potential of corn husk. International Journal of AgriScience, 4(44), 209-213. Retrieved from https://www.academia.edu/29045496/Pulp_and_paper_making_potential_of_corn_husk

Haryanto, & Titani, F.R. (2017). Bioplastik dari tepung tapioka dan tepung maizena. Jurnal Techno, 18(1), 1–6. Retrieved from http://jurnalnasional.ump.ac.id/index.php/Techno/article/view/1360

Ikhsan, M., & Anggono A.D. (2018). Pengembangan material kertas menggunakan serat sekam padi dengan variasi konsentrasi NaOH 10%, 15%, dan 20% (Skripsi thesis), Universitas Muhammadiyah Surakarta). Retrieved from http://eprints.ums.ac.id/60987/

Murtiningrum, Bosawer, F, E., Istalaksana, P., & Jading, A. (2012). Karakterisasi umbi dan pati lima kultivar ubi kayu (Manihot esculenta). Jurnal AGROTEK, 3(1), 81-90. Retrieved from https://www.researchgate.net/publication/325278358_Karakterisasi_Umbi_dan_Pati_Lima_Kultivar_Ubi_Kayu_Manihot_esculenta

Oluwole, O.I., & Avwerosuoghene, O.M. (2015). Effects of cassava starch and natural rubber as binders on the flexural and water absorption properties of recycled paper pulp based composites. International Journal of Engineering & Technology Innovations, 2(4), 7-12. Retrieved from https://core.ac.uk/download/pdf/228833259.pdf

Opara, I.J., Ossi, C.D., & OkoUdu, C.O. (2017). Formulation of cassava starch-based adhesive. Int. J. Adv. Res., 5(7), 26-33. Retrieved from https://www.journalijar.com/article/18040/-formulation-of-cassava-starch-based-adhesive./

Ozemoya, P.O., Ajisegiri, E.S., & Idah, P.A. (2007). Production of adhesives from cassava starch. Leonardo Electronic Journal of Practices and Technologies, 10, 93-98. Retrieved from http://lejpt.academicdirect.org/A10/093_098.pdf

Paskawati, Y.A., Susyana, Antaresti, & Retnoningtyas, E.S. (2011). Pemanfaatan sabut kelapa sebagai bahan baku pembuatan kertas komposit alternatif. Jurnal Widya Teknik, 9, 12-21. Retrieved from http://journal.wima.ac.id/index.php/teknik/article/view/1293

Qodri, A. (2016). Kualitas Kertas seni berbahan baku pelepah tanaman salak dengan perlakuan konsentrasi naoh dan lama pemasakan. Skripsi Thesis, Universitas Muhammadiyah Surakarta

Rainey, T.J., & Covey, J. (2016). Pulp and paper production from sugarcane bagasse in: O’Hara, I., Mundree, S. (2017). Sugarcane-Based Biofuel and Bioproducts. Wiley Blackwell. New Jersey.

Rao, N.G.M., Prasanthi, P.P., Kumar B.R., Ram, N.R., & Kumar A.E. (2020). Tensile strength of bagasse fiber reinforced composite with different orientation of bagasse fiber. International Journal of Advanced Science and Technology, 29(3), 14432-14438. Retrieved from http://sersc.org/journals/index.php/IJAST/article/view/31928/17700

Reddy, N., & Yang, Y. (2005). Biofibers from agricultural by products for industrial applications. Trends in Biotechnology, 23(1), 22-27. Retrieved from https://www.researchgate.net/publication/8100872_Biofibers_from_agricultural_byproducts_for_industrial_applications

Sadiku, N.A., & Abdukareem, K.A. (2019). Fibre morphological variations of some Nigerian guinea savannah timber species. Maderas Ciencia y tecnología, 21(2), 239-248. Retrieved from http://revistas.ubiobio.cl/index.php/MCT/article/view/3374

Sucipto, Wijana, S., & Wahyuningtyas, E. (2009). The optimization of NaOH and cassava starch concentration on the quality of art paper from banana leaves. Jurnal Teknologi Pertanian 10(1), 54-61. Retrieved from https://jtp.ub.ac.id/index.php/jtp/article/view/281

Suraj, M., & Khan, A. (2015). Environmental impact of paper industry. International Journal of Engineering Research & Technology, 3(20), 1-3. Retrieved from https://www.ijert.org/research/environmental-impact-of-paper-industry-IJERTCONV3IS20096.pdf

Surest, A. H., & Satriawan, D. (2010). Pembuatan pulp dari batang rosella dengan proses soda (konsentrasi NaOH, temperatur pemasakan, dan lama pemasakan). Jurnal Teknik Kimia, 17(3), 1-7. Retrieved from http://jtk.unsri.ac.id/index.php/jtk/article/view/112

Syamsu, K., Roliadi, H., Candra, K.P., & Arsyad, A.J. (2014). Kajian proses produksi pulp dan kertas ramah lingkungan dari sabut kelapa (study on the production of environmental friendly pulp and paper from coconut husk). Jurnal Teknologi Pertanian, 9(1), 16-25. Retrieved from https://repository.unmul.ac.id/assets/upload/jurnal/file_1011900286.pdf

Yosephine, A., Gala, V., Ayucitra, A., & Retnoningtyas, E.S. (2012). Pemanfaatan ampas tebu dan kulit pisang dalam pembuatan kertas serat campuran. Jurnal Teknik Kimia Indonesia, 11(2), 94-100. Retrieved from https://www.aptekim.id/jtki/index.php/JTKI/article/viewFile/39/36




DOI: https://doi.org/10.31932/jpbio.v6i1.800

Article Metrics

Abstract view : 2023 times
PDF - 616 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.